Aladdin Lox-on Mantle |
Use on all Aladdin Paraffin Lamps
Non Radio Active Preformed Mantle
For Lamps 1 - 11 use the Kone Cap Adaptor as the Kone cap Mantle is no longer available |
Aladdin No 23 Complete Lighting Burner |
Can be used to upgrade and or replace any Aladdin Paraffin Lamp or Heater Burner that has a 1" Wick and a coarse Thread Fitting |
Flame Spreader Steel or Brass Aladdin No 23. |
Fits all Aladdin Paraffin Lamps from number 12 on.
All Aladdin Heaters with 1 inch burners. |
Aladdin No 23 Heelless Lighting Gallery Brass or Chrome |
Suitable for Aladdin Paraffin Lamps 21, 21c 23 & 23a
Converts the 21, 21c & 23 Lamps from Locking Chimney to Heelless |
Aladdin No 23 Loxon Lighting Gallery Brass or Chrome |
Suitable for Aladdin Paraffin Lamps 21, 21c 23 & 23a
Converts the 23a Lamps to Locking Chimney
Not suitable for Central Draught Lamps |
Aladdin No 23 Outer Wick Tube Brass or chrome |
all lamps from 12 on
Aladdin Part Number N238 |
Aladdin 1" No 23 Wick Raiser/Carrier |
Aladdin Part No N233
For use on Aladdin Paraffin Lamps 23 & 23A and 23E60 refrigerators.
Upgrade Aladdin Burners 21 & 21c |
Aladdin 1" Wick Cleaner |
Plastic Wick Cleaner
Can be used on any 1" Aladdin wick as found in all Aladdin Lamps
Most Aladdin Greenhouse Heaters with 1" wicks and Radiators series 8 & 9 |
Aladdin Brassed or Chrome Tripod Shade Carrier |
For use on Glass or Pleated Shades on all Aladdin Lamps
Lamp Shades serve the same purpose as diffusers on electric lights they should be removed if the lamp is to be used as a desk lamp |
Aladdin Lamp Chain Hanger Chrome |
18 inch long chains plus 3 inch to top of Eye 21" overall
don't forget the Ceiling Hook and the font hanging out at the bottom
This works out to a 24 inch drop without Head clearance |
Aladdin Heelless Chimney |
Aladdin Chimneys are for Aladdin Lamps, that is they very rarely fit any other Lamp
2-5/8" outside base diameter 12-1/2" tall with a distinctive slim shape and Logo |
Aladdin Lox-on Chimney Locking Chimney with lugs at base |
Fits Lamps No 23
May not fit some earlier lamps such as 11, 12 & A.B.C or the Radiator Heaters
2-5/8" outside base diameter 12-1/2" tall with a distinctive slim shape and Logo
Aladdin Chimneys are for Aladdin Lamps, that is they very rarely fit any other Lamp |
Aladdin Kone Cap Mantle Adaptor |
Kone Cap Mantle used on Aladdin Lamps numbers 1 - 11 are longer available
Enables the Lox-on Mantle to be used on Lamps that use Kone Cap Mantles |
Aladdin Lamp High Altitude Adaptor |
Using an Aladdin Lamp at high altitude???
Solid Brass tube that Slips on the top of the Chimney
Increases the height of the Chimney to get a better Air flow |
Aladdin Lamp Anti Flicker Ring |
Steel Burners do not always burn correctly
Dosen't look much but this Brass Washer can make all the difference
Adds Brass to the burner and increases the heat at the wick |
Aladdin Lamp Base Felt (Colour May Vary) |
Never worry about scratches on your beautiful occasional Table
Self Adhesive 6" diameter felt. Cover the bottom of your Lamp
and prevent scratching the Furniture
Including Centre Draught Lamps with holes around the Foot ( You may have to make a Base Plate ) |
Aladdin Lamp Filler Cap Brass or Nicad |
Complete with rubber Washer.
So easy and irritating if you lose this.
Forget about Wine Bottle Corks here's the real deal.
|
Aladdin Lamp Lead Shot Weight |
Not suitable for central Draught Lamps
440 grms (1 lb) Lead Shot in a Cloth Bag, helps stop the lamp from tipping. You may have to remove and replace or make the Base Plate |
Combined Smoke Bell - Insect Shield Brass |
Stops Insects Breaking the Mantle and the dark ring on the Ceiling
Adds 3 inches to the height of the Lamp
Brass may Discolour with use |